iPhone OS3 (3.0) for 3G Stereo Headphone Set-up a Bit Tricky

Posted: June 18, 2009 in Apple
Tags: , , , ,

iPhone A2DP Headphone set-up is bit

different in OS3 than before.

I was sure it was missing.

I found with today’s launch of the iPhone OS 3 the bluetooth stereo headphone set-up a bit hidden and a bit tricky (as usual easy once you know).

For those that had used a A2DP dongle for their iPhone (like I did) prior to the OS update the hunt was a bit harder as I thought I knew what I was looking for.

For those that do not know, like many phones the iPhone (now) uses 2 types of Bluetooth, one for the phone and one for stereo headphones for music. The music standard is called A2DP and stands  for Advanced Audio Distribution Profile, and is part of the Bluetooth 2.0 classification. That gets me off the hook for the WTF questions.

It is worth noting that some bluetooth headsets work for phones, some only work for music, and some do both. The headphones that do both until now would not work with the iPhone for anything except the phone unless a special dongle was used, that offers a bluetooth A2DP signal from your phone so it will work for music and phone calls.

Typically a bluetooth ear piece (for 1 ear only) usually only works for phone calls, and have been around longer than the A2DP standard (or the Bluetooth 2.0 class it is part of). Equally those bluetooth headphones that are stereo (2 earpieces), are newer and often work with both phone calls and music (if available). Got that.. phew, a bit confusing I know.

Oh this is not the same as R2D2, which a different standard mainly for small electronic devices in popular Sci-FI movies.

Anyhow phones have one,  the other,  both or none.
The iphone had both but A2DP was not activated until now.

What to do?

1) The first thing is to press the buttons on your headset so it is in hunt/discovery mode , read the manual if you do not know how (RTFM).

2) Then go to the iphone and press settings/general/bluetooth and a secret I learned is to turn bluetooth off and back on (this helps with the headphone discovery).

This should brng up your 1st screen below, and likely show you the stereo headphones ( I am using Motorola S9). This is where it is a bit different.

Previously the headphones would have sinked ontheir own, now you simply touch the not connected words when they show up this then triggered the pairing of the headphones to the iPhone. Subtle but different

You may have to repeat the process a couple of times to get the sync to work but should not have to afterwards. When working you should see the connected indication per the 2nd photo.

Hope that helps someone (let me know)

 

Once this is working the job is not done, you need to go play your music, and touch on the headphone source in the bottom right hand corner to start using your headphones

Job done <phew>

Advertisements
Comments
  1. Andrew says:

    I got my iphone 3G with 3.0 to connect to my S9 with instructions like you provide but I can only get sound out of one ear when playing music. Any suggestions.

  2. mw says:

    I have the Yamaha YBA-10 for my home stereo and the iphone can’t even see it to try and pair up. Any suggestions?

  3. Steve Basile says:

    My older (mono) Jabra BT200, which had been paired happily pre 3.0 now stays “Not Connected” even after deleting it and rediscovering it. It finds the headset, and sees its name, butno option to repair appears, and it will not “connect”

    • Mitch says:

      I don’t suppose you’ve found any fixes for this? I’ve only just rediscovered my old Jabra, and after pairing I can’t connect no matter what I try (pairing, repairing, deleting repairing, clicking connect, clicking connect while pressing the speak button on jabra…)

  4. griffin7 says:

    I’m having the same problem with my trusty Jabra BT200! very annoying that I haven’t found an explanation or fix yet (it worked fine pre 3.0).

  5. Rat Fink says:

    My Motorola HT820s connected just fine, but the skip foward/backwards buttons do not work. Also, there is very little security – when my Bluetooth is on, my iphone is discoverable by other Blue Tooth devices.

  6. mkiombt@hotmail.com says:

    Thanks for the informative Article You can find A trackback on my site Thanks.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s